Stream pumps trust to the world.
-
Quickview
AUTO-SQB
Auto-Boosting PumpsModel
AUTOSQB-60: 0.5HP AUTOSQB-70: 0.75HP AUTOSQB-80: 1.0HPAccessory
Tank: 24L (Stainless steel tank optional) Flexible Hose: 1"/1" Pressure Switch: ON: 1.1 Bar, OFF: 1.8 Bar Pressure Gauge: 6 Bar (100PSI) Brass Connector: 5 way Cable: 1.0 meters (On Request)Operating Limits
Liquid temperature up to 60℃ Maximum ambient temperature 40℃ -
Quickview
AUTOSJETS-TYPE
Auto-Boosting PumpsModel
AUTOSJET-60/60B/60L/60S: 0.5HP AUTOSJET-80/80B/80L/80S: 0.75HP AUTOSJET-100/100B/100L/100S: 1HPAccessory
Tank: 24L (Stainless steel tank optional) Flexible hose: 1/2"/1/2" Pressure Switch: ON: 1.8 Bar, OFF: 2.8 Bar Pressure Gauge: 6 Bar (100PSI) Cable: 1.0 meter (On Request)Operating Limits
Liquid temperature up to 60℃ Maximum ambient temperature 40℃ -
Quickview
SDB
Peripheral PumpsApplications and InstallationThese pumps with peripheral impeller are able to offer high pressure in relation to comparatively low powers and which have particularly steady operating curves. For the correct functioning of the pump, pump clean water, or non-aggressive liquids only, without sand or other solid impurities. They are qualified in domestic fitting, to increase the system pressure in aqueducts and for automatic water distribution by autocalve tanks and by hydrosphere units. Pumps should be installed in a covered area, protected against the weather.Construction FeaturesPump body: cast iron Motor housing: Aluminum Shaft: 45#steel/stainless steel Impeller: brass Motor: closed, externally ventilated Insulation: B/F Protection class: IP44/54 Duty: continuous rated Mechanical seal: ceramic steatite/metalized carbonOperating LimitationsMax.ambient temperature up to 40℃ Max.fluid temperature up to 80℃ Max pressure up to 10bar -
Quickview
SDB60
Domestic Surface Pumps, Peripheral PumpsConstruction Features
Pump Body: cast iron Motor Housing: aluminium Shaft: 45# steel Impeller: brass Motor: closed, externally ventilated Insulation Class: B Protection Class: IP44 Duty: continuously rated Mechanical Seal: Graphite/ceramic -
Quickview
SDP
Self-priming Jet PumpsApplications and Installation
The SDP pumps are regarded as one of the best pumps for deep well. In fact, they consist of two pumps connected in series, one is ejector-pump and the other is a centrifugal pump. The ejector pump is lowered in well and connected to the centrifugal pump body by two pipes. These pumps are suitable for pumping clean water and chemically non-aggressive fluids. They are extremely reliable, economical and simple to use widely applied in domestic applications and the automatic distribution of water from small and medium-sized surge tanks, forming an automatic booster system to supply water. The most remarkable character is that they can be used to supply clean water from an extremely deep well. To ensure adequate counter-pressure, it is always installed with a foot valve and a filter on the suction opening. Pumps should be installed in a covered area, protected against the weather.Construction Features
Pump Body: cast iron Motor Housing: aluminium Shaft: 45# steel/stainless steel Impeller: brass /PPO optional Motor: closed, externally ventilated Insulation Class: B/F Protection Class: IP44/IP54 Duty: continuously rated Mechanical Seal: ceramic steatite/ metalized carbonOperating Limitations
Max ambient temperature up to 40℃ Max fluid temperature up to 80℃ Max pressure up to 10 bar -
Quickview
SPC
Drainage PumpsSPC series pump is characterized by high-head, compact size, lightweight, and easy to use. It is widely used in high-position water delivery, flush, and construction sites, etc. It greatly increases the service life by changing aluminium casting to stainless steel and using a double mechanical seal.Application
- Clean water without abrasive particles
- Mainly used for high position water delivery, flush, and construction sites
- Pumping water in aquariums, mine enterprise, gardens, family spray and irrigation etc.
Operating Conditions
- The maximum immersion depth is 5m
- Water temperature range is 0 ~ 40°C
- The PH scope of water is 6.5 ~ 8.5
- Passage of suspended solids in water is less than Φ0.2mm
-
Quickview
SQB
Peripheral PumpsApplications and Installation
The SQB series are peripheral pumps, with peripheral impeller containing numerous radial blades in its edge, suitable for pumping clean water and chemícally non-aggressive liquid. They have a relatively simple construction and are very economical, reliable and safe. It is widely used for household and domestic applications such as water supply from wells and pools, pressure boosting, garden sprinkling, washing booths etc. Pumps should be installed in a covered area, protected against the weather.Construction Features
Pump Body: cast iron Motor Housing: aluminium Shaft: 45# steel /stainless steel Impeller: brass Motor: closed, externally ventilated Insulation Class: B/F Protection Class: IP44/IP54 Duty: continuously rated Mechanical Seal: ceramic steatite/ metalized carbonOperating Limitations
Max ambient temperature up to 40°C Max fluid temperature up to 80°C Max pressure up to 10 bar -
Quickview
SQDL
Drainage PumpsAdvantages
- Longitudinally cutting shaft;
- High-efficient motor with very low noise and temperature rise;
- High-quality mechanical seal;
- Upgraded design style and materials;
- Keep the same colour as traditional SQD&SQX.
-
Quickview
STPS
Self-priming Jet PumpsApplications and Installation
The STPS series are self-suction pumps, with peripheral impeller containing numerous radial blades in its edge, self-priming because of the particular design of the pump body which is with a small tank, water is thrown outwards by centrifugal motion caused by the impeller. Then the water rotates with the impeller, generating high pressure. These pumps have a compact size and are very economical, finding the most different operating requirements such as supply water from well, pool and so on, increase the water pressure in the pipe garden sprinkling or clean washing. Pumps should be installed in a covered area, protected against the weather.Construction Features
Pump Body: cast iron Motor Housing: aluminium Shaft: 45# steel/stainless steel Impeller: brass Motor: closed, externally ventilated Insulation Class: B/F Protection Class: IP44/IP54 Duty: continuously rated Mechanical Seal: ceramic steatite/ metalized carbonOperating Limitations
Max ambient temperature up to 40°C Max fluid temperature up to 80°C Max pressure up to 10 bar -
Quickview
SWQ(D)(≤7.5KW)
Sewage PumpsApplication
Domestic/Commercial/Industrial use Drainage of sewage from the building basements, hotel, etc Draining industry wastewater from factories Pumping surface and draining water from the garages and sprinkler systemsOperating Conditions
Submersible depth: 5m Liquid temperature up to+40°C Ambient temperature up to+40°C Max working pressure: 6 bar Passage of suspended solid up to 35mmMotor
2-pole induction motor Insulation: Class E Protection: IP X8 Single-phase with capacitor and thermal overload protection Three-phase from 0.75kW to 2.2kW with thermal overload protectionMaterial
Pump body: Cast iron Motor bracket: Cast iron Impeller: Cast iron Motor shaft: SS420 Mechanical seal: Ceramic-Graphite, Silicon Carbide-Carbide alloy Copper winding -
Quickview
SWQ≥11kW
Sewage PumpsApplication
- Domestic/ Commercial /Industrial use
- Drainage of sewage from the building basements, hotel, etc
- Draining industry wastewater from factories
- Pumping surface and draining water from the garages and sprinkler systems
Operating Conditions
- Submersible depth: 5m
- Liquid temperature up to+40°C
- Ambient temperature up to+40°C
- Max working pressure: 6 bar
- Passage of suspended solid up to 35mm
Motor
- 2-pole induction motor
- Insulation: Class E
- Protection: IP X8
Material
- Pump body: Cast iron
- Motor bracket: Cast iron
- Impeller: Cast iron
- Motor shaft: SS420
- Mechanical seal: Ceramic-Graphite, Silicon Carbide-Carbide alloy Copper winding