SDB60

These pumps with peripheral impeller are able to offer high pressure in relation to comparatively low powers and which have particularly steady operating curves. For the correct functioning of the pump, pump clean water, or non-aggressive liquids only, without sand or other solid impurities. They are qualified in domestic fitting, to increase the system pressure in aqueducts and for automatic water distribution by autocalve tanks and by hydrosphere units. Pumps should be installed in a covered area, protected against the weather.

Pump body: cast iron Motor housing: Aluminum Shaft: 45#steel/stainless steel Impeller: brass Motor: closed, externally ventilated Insulation: B/F Protection class: IP44/54 Duty: continuous rated Mechanical seal: ceramic steatite/metalized carbon

Max.ambient temperature up to 40℃ Max.fluid temperature up to 80℃ Max pressure up to 10bar